DV Elbow Plug (old style)

C50
Add to cart

Solder-on plug to fit on the bottom of "old style" DV type mounts.

These do need a small soldering iron and a steady hand!  If in doubt buy a made up lead.

New Style DV Elbow Plug

C50n
Add to cart

Solder-on plug to fit on the bottom of new style DV type mounts.

After using the same style connector on their mounts for over 30 years Sirio have now changed the design so that it has a long pin on the plug!

These do need a small soldering iron and a steady hand!  If in doubt buy a made up lead.

DV Wing-nut & Bolt

C51
Add to cart

Wing-nut and bolt to fit a standard DV mount.

3/8 to DV Adapter

C52
Add to cart

Adapter to allow you to fit a standard 3/8 thread antenna onto a DV mount.

DV to 3/8 Adapter

C53
Add to cart

Adapter to allow you to fit a DV type antenna onto a 3/8 mount.

Can also be used together with the 3/8 to DV adapter (C52) to make up a "swivel".

Sirio Security Bolt & Key

P485
Add to cart

Replacement security bolt and key for Sirio antennas.

This one is BLACK but is the same as used on Hypower 400 etc.

Quick Release (long)

B60
Add to cart

A 3/8 thread quick release bayonet adapter.

Fits between the antenna and mount to allow quick removal of the antenna.

3/8 Swivel Adapter

B69
Add to cart

A 3/8 thread swivel adapter.

Used to adjust the angle of an antenna - often used when fitting an antenna onto a vertical surface (eg back of a cab).

The adapter is tightened and adjusted using the supplied alan key.

Antenna Spring

Add to cart

A 3/8 fitting spring, to fit between an antenna and mount.

Gives rigid antenna some degree of flexibility.

We have now sold out of the very weak spring (the one on the right of the picture).

3/8 to SO239 Adapter

C88
Add to cart

Adapter to fit on a SO239 mount to convert it to accept a 3/8 thread antenna.

Also see below for our 3/8 adapter with swivel.

Sirio 3/8 to SO239 Adapter

C88s
Add to cart

Made by Sirio to fit on their SO239 mounts (either magnetic or body) to convert them to accept a 3/8 thread antenna.

When fitted on the matching mag mount, you can not even see there is an adapter there!

Maxon to BNC Antenna Adapter

MXBNC
Add to cart
An adapter to fit onto Maxon PMR radios in place of the rubber antenna, to convert it into a BNC fitting - either for test purposes or to connect an external antenna.

Tristar Mobile Radials

W28
Add to cart

A radial kit to fit any standard 3/8 antenna.

Simply screw this into your 3/8 base, then screw your antenna into the top of this - and then you have a mobile antenna with 3 radials!

3/8 Whip Stud (long)

WSTL
Add to cart
A longer 3/8 thread base to take a standard size (2.5mm diameter) whip - for making up your own antenna etc.

Volvo Adapter (M6 to 3/8)

K20
Add to cart

An adapter to fit on the mount which is often found factory fitted on Volvo trucks (M6 male thread), to convert it into a standard 3/8 thread mount.

Lightning Arrestor (old stock)

C13
Add to cart

Basic lightning arrestor.

Fits in your coax feed and provides a terminal for you to connect an earth wire to.

PL259 on one end, SO239 on the other.

ST-1 Lightning Arrestor

C13M
Add to cart

Basic lightning arrestor.

Fits in your coax feed and provides a terminal for you to connect an earth wire to.

PL259 on one end, SO239 on the other.

A better quality version of the one above.

Add to cart

A coaxial lightning surge protector, to reduce the risk of damage to your radio from both lightning and static build-up on your antenna.

2 x SO239 sockets for inline connection.

Grub Screw

Y36
Add to cart
 
Replacement grub screw to fit most popular antennas (eg Modulator, Thunderpole, Moonraker, Hembro etc).

Whip Tip

Y36t
Add to cart
 
Replacement black plastic "tip" for the end of mobile antennas.

Allan Key

Y36a
Add to cart
 
Popular size allan key to fit most British made antennas.